Dr. Fixit Pidicrete AM is composed of plastisizers, expansion additives, polymers & defoamer. It is used for producing cementitious injection grouts for pressure / gravity injection into concrete structures, for producing cementitious grouts, which are suitable for bed grouting, duct grouting, filling etc. because it provides plas- tisizing action which improves flow, expansion additive provides shrinkage compensation after curing & high compressive strength.
Shrinkage - Produce shrinkage compensating cement slurry.
Permeability - Reduced water-cement ratio of cementitious grouts, the mix has reduced permeability to water.
Flowability - Provides good flowable grout mix so that mix could be easily placed or injected by gravity or pressurized injection pump.
Durability - Increases durability of repaired structures.
Corrosion - Chloride and iron free, hence no chance of corrosion.
Setting time - Does not affect the setting time of cement.
Strength - Does not affect the strength of cement, infact increases
Areas of Application:
For injection grouting in -
RCC slabs, Sunken slabs,
RCC walls of water tanks, swimming pools
Basements for waterproofing purpose
Rock and soil anchoring
Pre-placed aggregates and tunnel lining
Crack filling in structural cracks
For structural strengthening in repairs